Play Station Vita is an eighth-generation handheld game console by Sony, released in Japan on December 17. It can even upscale textures that would otherwise be too blurry as they were made for the small screen of the original SONY PS Vita (see also Windows, Android and iOS version). Vita3K PS Vita emulator for Mac is an experimental PlayStation Vita software for MacOS devices.The material partBolXEmu Xbox One and Xbox 360 Emulator. From time to time, those machines reappear on eBay or at private homes – I have one – but obviously without the Microsoft OS (and with Mac OS X). Then, Microsoft downgraded the machines, which were eventually sold to employees for $ 300, with obviously a completely erased hard drive. The development kits are used during a few years, at least until the E3 2005: the demonstrations of the Xbox 360 at the time are on Mac. As we will see, they differ essentially by the graphics card used. Before the arrival of the real console, the brand provides two variants to the developers: the Alpha 1 and the Alpha 2 kits.
![]() Xbox 360 Emulator 2019 Mac Is AnWith the right equipment, it becomes possible to launch the OS on a development kit of the time (like mine) but also on what they called a FrankenXenon. This is the 1529 version, which only supports Radeon X800 XT. We can install the OSThe interesting part is that in late 2018, a group broadcasted on the Net a copy (a disk image) of a Xenon system (the name of the OS). With the right OS and the right components, it is possible to install the operating system on a standard Power Mac G5. For a long time, the available information indicated that the Microsoft OS was checking the Mac on its serial number or that the network card was used as a pseudo-DRM, but actually… Nope. This is the original model. A hard disk of 160 GB, a priori necessarily a Seagate ST3160023AS. Normally, it is not a problem. If your Mac has four slots for RAM (not eight), it’s not good. You need a 2003 or 2004 version, but not a 2005 model, nor a PCI-Express model (with a dual core processor). A Power Mac G5 with two 2 GHz CPUs (only this frequency). An IDE optical drive, mandatory. It may work with others, but I did not succeed. It is easily found on eBay for a few euros with the right reference. An Xbox controller (original) with a USB adapter or a wired Xbox 360 controller. It’s easy to find it on eBay. It requires an Intel Pro100+ PCI, reference 741462-010 (the one provided by Microsoft) or 741462-010. An Intel network card if you want to connect the machine. The case of the graphics cardThis is the really bothering part. This is the complicated part, let’s detail it.You will also need time, a screen with DVI and a SATA to USB adapter or a machine on which you can connect a hard drive internally. An ATi Radeon X800 XT 256 MB with two DVI outputs (that’s important) and a Mac BIOS. This is the professional version of the card, and it is possible to flash it with a Radeon X800 XT BIOS for Mac. And of course, you need an AGP version, not a PCI-Express.For the alternative solution you will need an ATi FireGL X3. But be careful: do not use the same card as in my old example: the card must have two DVI outputs and not a DVI output plus a VGA output. I explained the method in this post (in french) and it works perfectly. Otherwise, you can flash a PC card. The problem is that it is overpriced (at least $ 150 to $ 200). Or find a card with Samsung memory.Then, the integration of a PC card or a FireGL requires to recover the power. Basically, you just have to get the frequency lower until you get a clean image. I will not detail it here (unless someone really wants to try) but the method goes through the same softwares as the ones used to flash BIOS. If you have a card with Infineon memory and that artifacts appear at startup (this was my case), you should also flash the frequency down. The Infineon does not seem to work at its standard frequency or has a bug with the Mac BIOS. There are cards with Samsung memory and others with Infineon memory. In my case, the kit did not start properly with a VGA screen, even with a DVI to VGA adapter. Be careful, the optical drive still needs power to make the Microsoft OS work.Last step before installation, you need a DVI screen. Normally, the cables are long enough to put the adapter at the back of the optical drive. This requires a double Molex socket, which will allow to recover the power on the optical drive. It may work on a version that does not come from Apple, I did not test. In theory, it can be restored on any hard drive over 160 GB, but in practice I have managed to run it only on a Seagate ST3160023AS (7200.7) from Apple. Beware: it requires 160 GB of disk space and the decompression can take some time. I had some problems fixing bs at 8 MB, but I do not know if it’s normal or not. The value after the if= is the path to the disk image (you can drag the file into the Terminal), the value after of= is the disk name and bs=1m indicates the size of the blocks. It is necessary to determine the logical name of the disk with the command diskutil list (for example /dev/disk8), then unmount the potential partition on the disk ( sudo diskutil unmount /dev/disk8s1) and then restore the image.Beware, the command will erase all the disk, and if you don’t pick the right disk, you will erase all your data. Export your bookmarks from chrome for macBut that’s it: Apple’s OS does not support the Xbox’s FATX file system and so does not spot it. If you try with an SSD, you can specify a higher value, which will speed up transfers.Sudo dd if=/Users/you/Downloads/imagedisque.img of=/dev/disk8 bs=1mOnce the image is restored, macOS will display a XeBoot partition of a few MB and that’s it. It may work with this value. If you have a grey image then nothing, try changing the screen and plugs. If the machine crashes with a lot of noise, you may have not put back the transparent cover correctly. If that does not work, this forum topic can help you. Either with the classic command ( command + option + P + R at startup) or by entering the Open Firmware ( command + option + O + F at startup) with the following commands:Then … it should start under Xenon OS. The hard drive must be plugged into the SATA “A” slot (the top one), and I advise you to perform a complete reset of the Mac. If you have the right components, it should work. In theory, it allows to launch images of Xbox games (the famous xbe), in practice it is extremely random. The Xbox emulatorThe SDK includes an Xbox emulator (the first one). At the end of the post, there is a video showing some screenshots of the interface. Let’s say that a beta of a title developed at the time on an Alpha kit should pass. In theory, it is also possible to use beta versions of Xbox 360 games, but the few titles I found did not work. If not, come ask here.In addition to that, there is an Xbox 360 Dashboard (quite old) with some options but mostly a lot of unusable functions. A history of ROMsTalking about emulation and (especially) games is always a little complicated. Quite logically, the Xbox 360 development kit contains a preliminary (and partially functional) version of the emulator that would be used for backward compatibility. Both are actually used for backward compatibility of consoles, and in some cases require downloading data. The two emulators that work pretty well are those of Microsoft, Fusion (for Xbox 360) and Fission (for Xbox One). In practice, it’s explained there, it’s complicated.
0 Comments
Leave a Reply. |
AuthorTodd ArchivesCategories |